Mix Proportion of Concrete

If you want to know the "Mix Proportion of Concrete" from M5 to M25, so this is the right place.
              MIX PROPORTION OF CONCRETE

Mix Proportion of Concrete
Mix Proportion of Concrete
Where;
      M = refers to the mix
       n = number specified compressive                                strength of concrete at 28 days.

Comments

Post a Comment

Popular posts from this blog

How to calculate quantity of Cement and Sand in Plaster

Image
How to calculate quantity of Cement and Sand in Plaster? Ex:    Area of plaster = 100 ft × 100 ft    Thickness of plaster = 12mm Step 1) find out volume of plaster:  (Need to all units that is "ft" and "mm" convert into "m" )                   1000mm = 1m So that;        12mm = 0.012m                      3.28ft = 1m So that;        100ft = 30.49m     Volume of plaster = 30.49 × 30.49 × 0.012                                      = 11.15 m³ Step 2) Convert plaster volume wet to dry:              Take 33%     Dry vol = 11.15 × 1.33                   = 14.83 m³ Step 3) Consider wastage:               Take 5%      Total dry vol = 14.83 × 1.05                             = 15.57 m³ Step 4) find out Cement and sand required:               Take;                    Cement : sand                               1 : 6     Cement req = 1/(1+6) × 15.57                           = 2.22 m³             Need to cement in bags  
Read more

Things Site Engineer Must Know about Reinforcement and Steel Bars

Image
There are some important things site Engineers must know about reinforcement and Steel Bars are as follows;         THINGS SITE ENGINEERS MUST KNOW            ABOUT REINFORCEMENT AND STEEL BARS ● Hooks for stirrups is 9D for one side. ● No.of stirrups = (clear span/spacing ) + 1 ● For cantilever Anchorage length for main steel is 69D. ● 'L' for column main bar in footing is minimum length 300mm. ● For chairs in footing minimum 12mm dia with 1m spacing should be used. ● Lapping of steel bar should not be used for larger than 36mm. ● In steel Reinforcement binding wire required 8kg per MT. ● Weight of rod per meter = D^2/162, (D=dia of bar). ● Main bar in the slab shall not be less than 8mm (HYSD) or 10mm (plain bar). ● Distribution bar in the slab shall not be less than 8mm and not more than 1/8 of the slab thicknes. ● All reinforcement shall be free from loose rust, oil or any other substances.
Read more