Responsibilities of Site Engineers

Her you can see the Responsibilities of site engineers point wise.This is very important to every civil site engineers.

      RESPONSIBILITIES OF SITE ENGINEERS

●Checking plans, drawings, quality of materials with accuracy.

● Site engineer act as a technical advisor on a construction site.

● Proper survey the site and set out the levels with architect engineer.

● Proper co-ordination with consultant, contractor, planners, supervisor, quantity surveyor involved in the project.

●Communicate with clients, architect, RCC consultant regular meeting to keep them informed of progress of the work.

● Ensure that all materials used with proper specification.

● Manage the work of the site and run with planning.

● Maintain quality control and safety matters.

● Resolve any unexpected Technical difficulties on the site.

● Prepare daily progress report.


https://youtu.be/x9mIMb4GZRI

Comments

Post a Comment

Popular posts from this blog

Mix Proportion of Concrete

Image
If you want to know the "Mix Proportion of Concrete" from M5 to M25, so this is the right place.               MIX PROPORTION OF CONCRETE Mix Proportion of Concrete Where;       M = refers to the mix        n = number specified compressive                                strength of concrete at 28 days.
Read more

Calculation of bricks in 1 brass

Image
In this article you will get "How to calculate bricks in 1 brass"                       BRICKS IN 1 BRASS 1 brass = 2.83 cubic meter How it's come?       1m³ = 1 m x 1 m x 1 m                = 3.28084 x 3.28084 x 3.28084                = 35.315 cft               (1 meter = 3.28084 feet) As we know,       1 brass = 10 ft x 10 ft x 1 ft = 100 cft Therefore,       1 brass = 100/35.315                     = 2.83 cubic meter ( proved) We take standard size of brick;            10 cm x 10 cm x 20 cm Now convert "cm" in to "m",  we get,             0.1 m x 0.1 m x 0.2 m = 0.002 cubic meter Now calculate no.of ...
Read more

Things Site Engineer Must Know about Reinforcement and Steel Bars

Image
There are some important things site Engineers must know about reinforcement and Steel Bars are as follows;         THINGS SITE ENGINEERS MUST KNOW            ABOUT REINFORCEMENT AND STEEL BARS ● Hooks for stirrups is 9D for one side. ● No.of stirrups = (clear span/spacing ) + 1 ● For cantilever Anchorage length for main steel is 69D. ● 'L' for column main bar in footing is minimum length 300mm. ● For chairs in footing minimum 12mm dia with 1m spacing should be used. ● Lapping of steel bar should not be used for larger than 36mm. ● In steel Reinforcement binding wire required 8kg per MT. ● Weight of rod per meter = D^2/162, (D=dia of bar). ● Main bar in the slab shall not be less than 8mm (HYSD) or 10mm (plain bar). ● Distribution bar in the slab shall not be less than 8mm and not more than 1/8 of the slab thicknes. ● All reinforcement shall be free from loose rust, oil or any other substances.
Read more